Product ID:S-SUPERMALLOY, TAPE WOUND & BOBBIN CORES (S
MSDS Date:01/05/1987
FSC:9650
NIIN:00N030410
MSDS Number: BNNWM

ARNOLD ENGINEERING CO

300 WEST STREET
MARENGO, IL 60152
US

Emergency Phone: 815-568-2303

Info Phone: 815-568-2303

Preparer: K.L. LATIMER

Cage: 95566

ARNOLD ENGINEERING CO DIV OF SPS TECHNOLOGIES

G MARENGO, IL 60152 US

Telephone: 815-568-2000

Cage: 95566

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BALANCE

OSHA PEL 1 MG/M3 (FE)

ACGIH TLV: 1 MG/M3 (FE)

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 79-81%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 3-4%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TAPE WOUND & BOBBIN CORES ARE USUALLY
SUPPLIED IN PROT NYLON/ALUMINUM COATED CASE. PRODS, AS SUPPLIED,
PRESENT NO HLTH HAZ. HAZ EXPOS COULD OCCUR ONLY BY PROCS SUCH AS
ABRASIVE GRINDING, CUTTING/MACHI NING W/OUT USE OF COOLANTS. ANY
LONG-TERM EXPOSURE TO DUSTS EXCEEDING RECOMMENDED TLV LEVELS MAY
RESULT(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:ANTICIPATED TO BE A CARCINOGEN
(NTP), 2B(IARC).
Effects of Overexposure:HLTH HAZ:IN IRRITATION TO UPPER RESPIRATORY
TRACT. DUSTS IN EYES MAY CAUSE IRRITATION. PROLONGED SKIN CONTACT
W/NICKEL MAY CAUSE ALLERGIC REACTION IN SENSITIVE INDIVIDUALS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. INHAL:REMOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF RESP) . INGEST:CALL MD
IMMEDIATELY . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD ( ).

Flash Point:NON-COMBUSTIBLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PROD NOT COMBUST. HOWEVER, IF ADDNL
GRINDING/MACHINING IS PERFORMED, IT SHLD BE DONE USING COOLANTS TO
CTL DUST LEVELS. ADEQ LOC EXHT VENT SHLD BE (SUPP DATA)

Spill Release Procedures:DUSTS MAY BE SWEPT WET OR VACUUMED TO KEEP
AIRBORNE DUST CONCENTRATIONS TO A MINIMUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE GOOD MFG PRACTICES & GOOD
HOUSEKEEPING PRACTICES THAT WILL KEEP GENERATED DUSTS TO A MINIMUM.
USE PERSONAL PROT EQUIP WHEN REQUIRED.
Other Precautions:USE GOOD HYGIENE PRACTICES. GRINDING/MACHINING
OPERATIONS SHOULD BE PERFORMED USING COOLANTS TO REDUCE DUSTS.

Respiratory Protection:IF AIRBORNE CONCENTRATIONS EXCEED THOSE
SPECIFIED, NIOSH/MSHA APPROVED RESPIRATOR SHOULD BE USED.
Ventilation:ADEQUATE LOCAL VENTILATION SHOULD BE USED WHEN DRY GRINDING
OR MACHINING ALLOYS TO KEEP EXPOSURE LEVELS BELOW RECOM TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACTICES. AVOID
INGEST OF DUSTS BY NOT EATING/DRINKING/SMOKING IN AREAS WHERE
DUSTS/ (SUPDAT)
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:USING NICKEL-IRON ALLOY. EXPLO HAZ:UTILIZED TO
REDUCE DUST CONDITIONS. FINE METAL POWDERS MAY CAUSE EXPLOSIVE
HAZARD. HYGIENE PRACT:FUMES ARE GENERATED.

HCC:N1
Spec Gravity:8.74
Solubility in Water:NOT SOLUBLE
Appearance and Odor:SILVER-GRAY; NO ODOR.

Stability Indicator/Materials to Avoid:YES
PWDRS/DUSTS FROM PROD ARE INCOMP W/STRONG OXIDIZING AGENTS SUCH AS
NITRIC ACID.
Stability Condition to Avoid:AVOID GENERATION OF AIRBORNE DUSTS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.